BMP High Performance Cold Mix Application Tips
BMP’s high performance cold mix is a polymer modified asphalt-and-aggregate patch repair product that is ready to use with no mixing or heating. Use BMP’s cold mix to repair cracks and pot holes in blacktop and concrete and the surface is ready for traffic instantly!
Applying BMP’s high performance cold mix is as easy as 1, 2, 3...
- FILL - Prepare patch surface by removing loose dust, dirt and debris with a broom, make sure the base of the hole is solid, fill cold mix to a level higher than existing pavement.
- LEVEL - Spread cold mix evenly over patch area.
- TAMP - Compact with tamper, roller, vehicle wheel or plate compactor.
Stockpiling BMP’s cold mix must be placed on a clean pad of HMA or concrete. Do not permit BMP to become contaminated with any other materials, including dust, as contamination will shorten stockpile life and reduce workability in sub-freezing temperatures.
BMP’s high performance cold mix guarantee:
- 90% of all BMP patches will stay in place for the normal life of the surrounding pavement when patches are properly applied (see stages 1-3) and the stockpile is properly stored.
- BMP will remain workable in sub-freezing temperatures when stockpile is properly maintained.
- BMP will perform well, even in wet conditions.
- BMP requires no primer coat.